EN
ACM panels are great for usage in outdoor or indoor wall cladding, signs and building facades. LUCKYBOND is a leading manufacturer for ACM panels and has over three decades of experience. LUCKYBOND ACM panels are top quality and known for being fireproof, weatherproof, and durable. Periodic maintenance helps preserve the panels, as well as extend their service life. LUCKYBOND ACM panels are a combination of top tier materials and craftsmanship, but they require regular maintenance. Panels should look and perform their best, indoors or outdoors and should be maintained professionally.
Stain Removal and Cleaning of ACM Panels
Cleaning ACM panels helps with the appearance of the panels and their performance. The ACM panels manufactured by LUCKYBOND have smooth PET coated aluminum surfaces which are easy to clean. For daily, maintenance, simply use a soft dry cloth or sponge with mild soapy water to wipe dust and dirt off the surfaces. Use of harsh chemicals andy or abrasives should be avoided as these damage the coatings of the ACM panels. For tough stains or spray on the panels use a special cleaning agents as recommended by LUCKYBOND and thoroughly rinse with clean water afterward. Indoo ACM panels should be cleaned every 3-6 months or as needed while outdoor ACM panels should be cleaned every month because of their exposure to weather elements. Cleaning the panels helps to prevent the accumulation of dirt on the perforated panels and helps to maintain the coating on the ACM panels.
Protection against Weather Elements for Outdoor ACM Panels
Outdoor ACM Panels need extra defense against extreme weather to perform optimally. LUCKYBOND's ACM panels are weather resistant, but exposure to the sun, heavy rain, and extreme temperatures can impact durability. Protecting ACM panels starts with proper installation. Ensure that the panel is mounted with adequate drainage to avoid water pooling. Every 2-3 years, apply UV protective coating to shield the ACM panel from sun damage and fading. In extreme cold, use an ice scraper carefully, as this can scratch the surface. Inspect the ACM panel regularly for bending or fractures, especially after severe weather. Following these suggestions will heighten the outdoor ACM panel's defense against the elements.
Keep ACM Panels Damage Free
To maintain the structural integrity of the ACM Panels, the first step is to prevent any type of physical damage. Although LUCKYBOND’s ACM panels are lightweight and durable, they can be damaged due to impact or improper handling. During daily activities, avoid hitting or scraping the ACM panels with hard, harsh materials. Install protective barriers around the ACM panels to avoid unintended collisions at high traffic indoor locations. When ACM panels need to be moved, take extra care to avoid damaging the surface and to prevent scratches. To prevent rust and further damage to the ACM panels, apply a touch up paint to any surface scratches that can be easily made. Keeping the ACM panels physically damage free will make long term, even permanent use that much more achievable.
Maintaining and Inspecting Installation Joints
The installation joints of the ACM panel need to be regularly checked and maintained so they can remain stable. The joints on LUCKYBOND’s ACM panels are installed precisely and need to be checked for loosening or gaps on a regular basis. Fasteners for the joints can be affected by temperature changes and vibrations so loose screws and bolts need to be tightened promptly. Joints can cause leakage and water damage to both the ACM panels and the structures beneath them. Use a sealant approved by LUCKYBOND to seal the gaps and prevent moisture intrusion. Maintenance of a sealant ensures an ACM panel is optimally performing and is firmly intact.
Controlling Moisture and Mold with ACM Panels
In humid conditions, the performance of ACM panels can be negatively affected by moisture and mold. LUCKYBOND panels are water proof and mold-free, but good moisture management is still important. For indoor ACM Panels, good ventilation is needed. For outdoor installations, do not allow ACM panels to be in direct contact with wet soil and standing water. If mold spots appear, remove them immediately using a mold remover that is non-abrasive and safe for the coating of the panels. Regular inspections of corners, edges, and other locations with moisture build up are important to prevent mold growth. Protective moisture control will help ensure the quality of ACM Panels.
Professional Inspection and Maintenance Services
Optimizing LUCKYBOND's ACM panels long-term performance means obtaining professional inspection and maintenance services. LUCKYBOND employs over 50 engineers and technicians to guide maintenance support to optimize the ACM panel. With the aid of professional inspections, unnoticeable hidden damages and coating wear can be detected. The team analyzes the ACM panel's site and use parameters to craft tailored maintenance plans. Also, if a component of the ACM panel requires replacement, LUCKYBOND sells genuine replacement components. Professional maintenance services provide customers peace of mind that the ACM panel will always perform to the best of its ability.